|
Coastal High Speed Planers & Infeed systems
|
|
Features:
- Removable Top and Bottom Heads or Conventional In-place Top
and Bottom Head Machines
- Removable Top and Bottom Heads or Conventional In-place Top
and Bottom Head Machines
- All Steel Fabricated Frame with Wide Flange Sub-base
- Larger Diameter Feed Rolls
- Increased Horsepower on Cutter Heads
- Larger Diameter Cutter Heads for More Knives in the Heads
- Capability of 2000 FPM or More
- Hydraulically Positioned and Tensioned Top Feed Rolls
- High-speed Gap Sensing with Top Roll Control
- Water Cooled One Piece Guide
- Air Operated Chip Breakers with Remote Control
- Hydraulic Lock - Top, Side and Bottom Heads
- Linear Bearing Top and Bottom Jointers
- Side Head Plunge Jointers
- Top Pressure Bar with Quick Release, Wedge Adjustment and Remote
Control
- Top and Side Head Setworks
- Air Bag Side Head Hold Over
- Air Operated Side Head Chip Breaker
- Quick Release Side Head Hold Down Shoes
- Mechanical Digital Readouts for Bottom Infeed Roll, Main Bed
Plate, Side Head & Other Functions
|
|
|
Feed Table
Features:
- Remote Operations Capabilities
- Shifting Shear Open/Reset
- Shifting Pineapple Lateral Position
- Vertical Position of Pineapples, Short Stock and Powered Hold
Down Rolls
- Thin Board Controls
- Quick Open on All Top Rolls
- Hold-downs on Bridge
- Planer Top Head Chip Breaker
- Planer Pressure Plate
- Planer Side Head Hold Down Shoes
|
|
|
Bridges
Features:
- Reduce Gap Closing Speed Utilizing Aggressive Rolls and Shifting
Pineapples
- Powered Hold Down for Quick Board Acceleration Which Requires
Lowered Top Speed
|
|
|
Controls
Features:
- PLC-based Control System Featuring Synchronized Feed Speed Control
- High-resolution Cutter Head Positioning
- Electric (VFD) or Hydraulic Roll Drives Provide Proportional Control of Planer and Feed Table Speed
- Fully Synchronized Feed Roll Speeds
- Closed-loop Position and Tension Control for Each Press Roll
- Gap-sensing Infrared Eye
- User Friendly Touch Color Displays for Planer and Infeed Table Roll Speeds, Cutter Head Position, Planer Setup, Calibration Procedure and Machine Diagnostics
- Computer System Allows Mill-level Control of Planer Configuration and Receipt of Diagnostic/Statistical Information
- Data Collection Capabilities
|
|
